This is a trendy, team designed, OBDSTAR MP001 Multi-Function Programmer for OBDSTAR P50, DC706, X300 Classic G3, MS80 which has been designed with softness and comfort. The OBDSTAR MP001 Multi-Function Programmer for OBDSTAR P50, DC706, X300 Classic G3, MS80 is designed with a mesh back, which allows the wearer to feel cool and have a natural range of motion. The OBDSTAR MP001 Multi-Function Programmer for OBDSTAR P50, DC706, X300 Classic G3, MS80 is also designed with a moisture wicking fabric, so that the wearer will stay dry and comfortable.

OBDSTAR P001 Programmer with ECU Bench Jumper for OBDSTAR P50, DC706, X300 Classic G3, MS80.

P001 programmer on the basis of original adapter features,integrated with the EEPROM adapter, RFID adapter and Key Renew adapter, is a multifunctional programmer.

OBDSTAR MP001 Programmer+C4-01 Host + W004/W005/W006/ECU Bench Jumper:

MP001 is the latest multifunctional programmer developed by OBDSTAR, which fully supports data read/write, clone, data processing functions for automotive, commercial vehicle, new energy vehicle, motorcycle, marine (jet-ski).

Compatible with OBDSTAR DC706, P50, MS80 and new X300 Classic G3.

OBDSTAR MP001 Programmer Software Function:

EEPROM/MCU reading and writing
Key flashing
Steering angle repair
Body computer data processing
Immo off
Pincode reading
Battery module repair
Instrument repair
more functions are under development

Note:

MP001 has P003+, P003, P002 functions.

Different tablet device models require different configuration software.

Recent OBDSTAR software update that requires MP001:
OBDSTAR MS80/ MK70/ iScan Yamaha add Yamaha proximity 12-pin, 18-pin, support program via P003+ or MP001 Programmer

OBDSTAR MP001 Multi-Function Programmer Features:

1. MP001 is compatible with the function of the P002 adapter (TOYOTA/FORD all keys lost adapter, HONDA/YAMAHA/SUZUKI all key lost adapter) and P003/P003+ adapter (some models of engine/transmission clone K/CAN conversion, BOOT mode read/write).
 
2. MP001 can replace P003, P002 adapter as well.

3. When use MP001 with DC706, just plug it in and the 706 will update the firmware then upload what it needs to configure the MP001 for whatever ECU you are connecting to. All automatic.

4. When read and write Chrysler GPEC2 ECM etc, MP001 does not require a 120ohm resistor between CAN H and CAN L wires, P003/P003+ does need it. 

6. Only when write R7F701A033/R7F7010643 airbag ecu data, you need MP001 with P50. 

OBDSTAR MP001 Programmer Specification:

CPU: STM32F407VET6

Connector: DC, OBD female, OBD male, DB9, DB25

Input voltage: DC 12V/24V

Output voltage: 500mA

Weight: 260g

Working temperature: -10℃~55℃

Device Size: 165*110*35mm

OBDSTAR MP001 Programmer Packing List:

W004 cable

W005 cable

W006 cable

C4-01 board

C4-02 board

W003 cable

W007 clip cable

This is a brand new and high quality OBDSTAR MP001 Multi-Function Programmer for OBDSTAR P50, DC706, X300 Classic G3, MS80. It features a cool and comfortable design and is made of 100% cotton. It is a perfect gift for any football fan.